|
Hot melt laminator (bonding machine)
>>Click here for details
Outline
Hotmelt adhesive is first spread onto a base material in the gravure coating unit, then lamination is carried out.
 |
 |
| Laminating unit |
Gravure coating unit |
Adhesive
Polyurethane-based hotmelt adhesive
Amount used: 15-40g/m2
Features
Because of the polyurethane-based adhesive being a non-solvent-based and moisture-reactive type, no explosion proofing or dryers are required, thereby making it an energy-saving, environment-friendly and pollution-free laminator. Furthermore, reduction in initial costs can be expected as only a small area is required for installation.
Specifications
| Base materials: |
weaves, knits, film, nonwovens |
| Working width: |
max. 1,800mm |
| Working speed: |
10-20m/min. (standard) |
Utility
| Power: |
200V, 50/60Hz, 3 phase |
| Steam: |
1.9kg/cm2G |
| Air: |
7kg/cm2 (approx. 0.69MPa) |
Assembly drawing
∧TOP |