A halftone motif printed on the back of foam, laminated, ground and semi-discharge printed

Clear Resin W-500 is a product specially designed to produce high-value-added prints by stripping parts of ground dyestuff off fabric.

Discharge-printed parts of pad-dyed or dyed fabric will come off because of absorption by the resin during steaming. This results in an excellent semi-discharge printing effect.

Clear Resin W-500 can also be applied in resist printing.

[ Features ]

Appearance: Pale yellow paste
pH: 4±1
Viscosity: 14,000-16,000 cps

[ Printing paste recipe ]

Clear Resin W-500	85-100
Water	15-0
(Addition of illumination colors is possible)
	100

[ Resist printing: process]

1. Print with Clear Resin W-500 applied on pad-dyed or dyed fabric, dry and steam (HP or HTS).

2. Print with Clear Resin W-500, dry, print with color paste, dry and steam (HP or HTS).

• With Clear Resin W-500, good results can be obtained using the wet-on-wet method as in b.

• Clear Resin W-500 is recommended for use with most disperse and acid dyestuffs.

• To reduce viscosity, dilute with water.
  

• This agent does not require dyestuff selection because of the method of decoloration through elution and absorption. Dyestuffs' compatibility to discharge printing, therefore, is not an issue here.