Anti-slip agent
Queenseter SS No.7
Queenseter SS No.7 is a specifically modified, silica-based agent capable of producing outstanding effects in the prevention of slipping and deterioration in abrasion resistance without hardening the hand.
| Appearance |
: |
Colorless translucent liquid |
| pH |
: |
4.0-6.0 |
| Ionicity |
: |
Cationic |
| Solubility |
: |
Easily dissolves in water in any ratio |
Features
- Produces superior effects in prevention of slipping and deterioration in abrasion resistance used in small quantities.
- Does not cause coarsening of hand.
- Good compatibility with other finishing agents
- Good mechanical stability
Method of use
0.5-2% solution of Queenseter SS No.7, padding→drying
- The amounts used vary depending of the kind and structure of substrate
- Curing (heat treatment), while not required, will not produce any adverse effects.
- Preliminary thorough testing of compatibility required for simultaneous used with other finishing agents
Abrasion resistance test
| Specimen |
: |
Cotton corduroy (3800) |
| Method |
: |
ile removal tested using a JIS L-1075 abrasion tester
| Abrasive paper |
: |
CC-600-CW |
| Frequency |
: |
500 |
| Load |
: |
40g |
| Area |
: |
25mm |
|
| Process |
: |
1) Untreated
2) Padded with 2% solution of Queenseter SS No.7 and dried |
| Results |
: |
The rates of pile retention were 4.5% in 1) and 51.3% in 2) |
Anti-slip test
| Specimen |
: |
Polyester taffeta |
| Method |
: |
JIS L-1096 stitch slippage method B,
padding→drying in all cases |
| Results |
: |
See Table 1 |
Anti-slippage test
 |