Kotani Chemical Industry Co., Ltd.
HOME
Textile auxiliaries
Kotani Chemical Industry
Contents
Soaping
Dyeing
Finishing
Correction
Functional finishing
Car seat
Sand/soil anti-adhesive agent
Fluorine-based water/oil repellent agent
Reactive silicone softener
Strong anti-pile detaching agent
Search pages from texitileinfo

Strong anti-pile detaching agent
Queenseter 2PL

"Queenseter 2PL" is a strong anti-pile detaching agent developed by Kotani Chemical Industry.

It has been the worst weakness of pile textile products that detaching of pile, which often occurs with friction and tearing while being worn, considerably restricts the application of a product which should be more widely utilized.

"Queenseter 2PL" is an effective finishing agent for strongly preventing pile detaching with soft hand being maintained, and can be widely applied to velveteen, corduroy, velvet, velour, moquette, seal skin, pile-knit and pile-towel.

"Queenseter 2PL" consists of two kinds of chemical (A sol and B sol) as shown below.

 

Appearance

Ionicity

pH

Composition

A sol

Milky white emulsion liq.

Nonionic

4~6

High-molecular weight wax polymerwith excellent smoothness

B sol

Translucent emulsion liq.

Cationic

4~6

Inorganic adhering binder

* “Queenseter 2PL”used to be one-component, but now it is sold as two-component(A sol/B sol) because of its stability.

The standard recipe of “Queenseter 2PL” is as follows.

Queenseter 2PL

A sol ・・・・・・・・・・

10g/L(1% solution)

 

B sol ・・・・・・・・・・

30g/L(3% solution)

Nonionic penetrating agent

・・・・・・・・・・・・・・・・

 5g/L(0.5% solution)

 

Padding (pick up 80%) →Drying (110°C x 2min.)


(1)

It does not cause deterioration of fastness to light, perspiration, washing and rubbing.

(2)

It does not cause change of brownish shade.

(3)

Outstanding soft hand can be achieved.

Data of anti-pile detaching effect is briefly shown below.

Anti-pile detaching effect with gum tape method

A. Method with mangle

Both treated and untreated corduroy were placed in and run through a mangle, the surface of which had gum tape rolled around it sticky side out, applying 5-atmosphere loads before the level of pile-detaching was evaluated with the naked eye (see the data below for the results).

B. Method with load

Stick gum tape on both treated and untreated corduroy before applying 4.5 kg of load from above.Peel off the gum tape before the level of pile-detaching is evaluated with the naked eye(see the data below for the results).

Anti-pile detaching effect with abrasion tester

 

Specimen

Corduroy 3800

 

 

 

  〃  3800S

Abrasive paper

CC-600-CW

Friction times

500 times

Load

40g

Area

25mm

The rates of pile retention

JIS L 1075 (Universal method)


   

Pile retention rates

3800

Untreated

4.1%

Treated

53.9%

3800S

Untreated

2.1%

Treated

61.8%

Copyright (c) 1999-2008, IS Co., Ltd. All Rights Reserved.
No reproduction or republication without written permission.
net@textileinfo.com